CATALOG / sealant-topup
Template · sealant-topup
SEALANT TOP-UP — TUBELESS
Customer walk-in: top up tubeless tire sealant without breaking the bead. Deflate, inject the per-vehicle volume through the valve, redistribute, re-inflate to spec.
Intake: answers gate which atoms compose
vehicle-type
Which vehicle is this?
escooteronewheeleskateemoto
Composed steps · 4 atoms in order
atom:power-down-and-photo1 step
01power-down-and-photo/1
Power down + photograph cable routing
capture“Vehicle powered down?”
capture“Snap a photo of the cable routing.”
PASS / FAILPHOTO
atom:tire-deflate1 step
02tire-deflate/1
Remove valve core and confirm full deflation
capture“Valve core removed?”
capture“Tire fully deflated?”
PASS / FAIL
infoCap goes in the toolbox tray, not on the floor — it walks off.
atom:tire-sealant-inject3 steps
03tire-sealant-inject/1
Rotate the wheel so the valve sits at roughly the 6-o'clock position before removing the core, so old sealant pools away from the valve
capture“Valve rotated to roughly 6-o'clock?”
capture“Valve core removed?”
infoKeep the wheel on the vehicle — a top-up does not require breaking the bead. Cap and valve core go in the toolbox tray, not on the floor.
04tire-sealant-inject/2
Inject sealant through the valve to the per-vehicle volume, then reinstall the valve core
branch on vehicle-type
Sealant volume by vehicle type
E-SCOOTERescooter
2.escooterInject sealant through the valve — escooter spec
capture“Sealant brand?”
capture“How many ml of sealant added?”
PARTVALUE · ml
ONEWHEELonewheel
2.onewheelInject sealant through the valve — onewheel spec (~4 oz Slime/Stan's)
capture“Sealant brand?”
capture“How many ml of sealant added?”
PARTVALUE · ml
E-SKATE ATeskate
2.eskateInject sealant through the valve — e-skate AT spec
capture“Sealant brand?”
capture“How many ml of sealant added?”
PARTVALUE · ml
E-MOTO STREETemoto
2.emotoInject sealant through the valve — e-moto street spec
capture“Sealant brand?”
capture“How many ml of sealant added?”
PARTVALUE · ml
05tire-sealant-inject/3
Spin and rotate the wheel a few turns to redistribute the sealant around the inside of the tire
capture“Sealant redistributed around the tire?”
PASS / FAIL
atom:tire-inflate-to-spec1 step
06tire-inflate-to-spec/1
Inflate to target PSI for vehicle type, then confirm with gauge
warningAlways confirm pressure with an external gauge after compressor fill — built-in pump gauges drift.
branch on vehicle-type
Inflate to spec — branch by vehicle type
E-BIKEebike
1.ebikeInflate ebike tire to spec
capture“Final pressure achieved — what PSI?”
VALUE · psi
E-SCOOTERescooter
1.escooterInflate escooter tire to spec
capture“Final pressure achieved — what PSI?”
VALUE · psi
E-MOTOemoto
1.emotoInflate emoto tire to spec
capture“Final pressure achieved — what PSI?”
VALUE · psi
E-SKATEeskate
1.eskateInflate eskate tire to spec
capture“Final pressure achieved — what PSI?”
VALUE · psi
EUCeuc
1.eucInflate EUC tire to spec
capture“Final pressure achieved — what PSI?”
VALUE · psi
ONEWHEELonewheel
1.onewheelInflate Onewheel tire to spec
capture“Final pressure achieved — what PSI?”
VALUE · psi
deviation_rules · 4 declared
ad_hoc_step
a captured step is not in the runbook for the resolved vehicle / tire-type / brake-type branches
missed_step
a runbook step for the resolved branches has no capture in the job record
missing_required_evidence
a step's capture.evidence item went unfilled by the tech's narration
branch_candidate
narration matches a finding pattern (unexpected wear, soft brakes, damage) but no branch was taken
snapshot_hash: sha256:2ad9b525f77f6afc… · served as ETag on read · X-Relay-Schema-Version: 0.8.0